Cost guide · Updated November 2026

How Much Does a Kitchen Remodel Cost?

Cabinets are usually the biggest line item in a kitchen remodel, often around 30% of the budget.

Typical range

$14,590–$41,620

National average

$26,990

Source: HomeAdvisor, accessed October 2026. Actual prices depend on your home, materials and location.

A kitchen with white shaker cabinets and a butcher-block island, with one section under repair

Common prices

ItemTypical costWhat it covers
Minor updatesFrom about $3,500Project total
Cosmetic / minor remodel$10,000–$20,000Project total
Major midrange remodel$20,000–$65,000Project total
High-end makeover$65,000–$130,000+Project total
Stock cabinets$100–$300 per linear ft.Installed
Custom cabinets$500–$1,200+ per linear ft.Installed
Cabinet refacing$4,270–$10,200Project total
Cabinet refinishing$1,900–$4,500Project total
Countertop installation$1,870–$4,400Installed
Backsplash (professional)$500–$1,700Installed
Moving a gas line$375–$750Add-on
Electrical panel upgrade$520–$2,000Add-on
Recessed lights$100–$300 per fixtureInstalled
Permits$460–$2,770Fee

What the labels mean: Project total typical total for the whole job · Installed materials and labor · Add-on priced separately from the main job · Fee permit, inspection or service fee. Permits, removal of old materials and finishing work are included only where a row says so.

Example budgets

These examples show how the published figures add up for common projects. They are arithmetic on the national ranges above, not quotes.

Cosmetic refresh

$10,000–$20,000

Refinished or refaced cabinets, new counters, backsplash, sink and faucet, lighting and paint. Layout stays the same.

Midrange remodel, same layout

$20,000–$65,000

New cabinets, counters, flooring and some appliances, with plumbing and gas in the same places.

Full renovation with layout changes

$65,000–$130,000+

Moving walls, plumbing or gas, new electrical circuits and high-end finishes.

By size: 150 sq. ft. kitchen

$11,250–$37,500

HomeAdvisor’s range of $75–$250 per sq. ft. applied to a 150 sq. ft. room.

Scope choices that change the price

Close view of cabinet doors, drawer hardware and countertop edge in a practical kitchen
  • Reface or replace cabinets. Refacing keeps your cabinet boxes and adds new doors, drawer fronts and veneer. It works when the boxes are solid and the layout works. Replacement lets you change the layout and fix damaged boxes.
  • Countertop materials. Laminate is the most affordable. Quartz is low-maintenance; granite and marble vary widely in price and need sealing.
  • Appliance allowance. Appliances are often listed as an allowance or left out entirely. Make sure each quote treats them the same way.

What affects the price

  • Cabinets. Stock, semi-custom or custom cabinets make the biggest difference to price.
  • Countertops. Laminate is the most affordable; quartz, granite and marble cost more.
  • Kitchen size. Larger kitchens need more cabinets, counters and flooring.
  • Layout changes. Moving plumbing, gas or walls adds trades, permits and time.

Costs that are often left out

  • Electrical code updates. Opening walls often triggers required updates such as dedicated circuits and GFCI protection.
  • Hidden damage. Water damage under the sink or dishwasher is common and found only during demolition.
  • Flooring under cabinets. If new cabinets have a different footprint, the floor may need patching or replacing.
  • Living without a kitchen. Plan for several weeks of takeout or a temporary kitchen.

How long it takes

A typical sequence is design and ordering, demolition, rough plumbing and electrical, inspections, drywall, cabinets, countertop templating and install, backsplash, then appliances and final trim. Cabinets and countertops often have the longest lead times.

Upkeep after the job

  • Seal natural stone. Granite and marble counters need periodic sealing.
  • Check under the sink. Look for slow leaks under the sink and around the dishwasher a few times a year.

Questions to ask before you hire

  • What is included in each allowance (cabinets, counters, tile, appliances)?
  • Are you keeping the plumbing, gas and walls where they are?
  • Who designs the layout, and is design included in the price?
  • What is the project sequence, and when will the kitchen be unusable?
  • How are change orders priced and approved?
  • Get at least three quotes. Prices for the same job often vary a lot between contractors.
  • Compare the same scope. Make sure each quote covers the same materials, removal, permits and cleanup.
  • Check license and insurance. Ask for proof of insurance and look up the contractor's license with your state.
  • Get it in writing. A written estimate should list the work, the price, the payment schedule and the warranty.

Keep reading

Sources

Prices are national figures published by the sources above and are for general information only. Example budgets multiply those published ranges by the quantities shown. They are not a quote or an offer from FixFinch or any contractor.