Cost guide · Updated November 2026

How Much Does New Flooring Cost?

Flooring is priced per square foot installed. Labor is often around 60% of the total.

Typical range

$1,528–$4,850

National average

$3,153

Source: HomeAdvisor, accessed October 2026. Actual prices depend on your home, materials and location.

A worker measuring a subfloor before installing wood flooring in a dining room

Common prices

ItemTypical costWhat it covers
Vinyl / LVP$2–$14 per sq. ft.Installed
Laminate$3–$13 per sq. ft.Installed
Carpet$3.50–$11 per sq. ft.Installed
Engineered wood$4.50–$16 per sq. ft.Installed
Hardwood$6–$25 per sq. ft.Installed
Tile$15–$20 per sq. ft.Installed
Installer labor$0.60–$4 per sq. ft.Labor only
Removing old flooring$1.50–$3.50 per sq. ft. (tile $2–$7)Add-on
Subfloor replacement$3–$10 per sq. ft.Add-on
Underlayment$0.50–$5.40 per sq. ft.Product only
Stairs$11–$160 per stepInstalled

What the labels mean: Installed materials and labor · Labor only installation labor, no materials · Add-on priced separately from the main job · Product only materials or the product itself, no installation. Permits, removal of old materials and finishing work are included only where a row says so.

Example budgets

These examples show how the published figures add up for common projects. They are arithmetic on the national ranges above, not quotes.

10×10 ft. room

About $1,250 average

Angi’s average for 100 sq. ft.

12×14 ft. bedroom, LVP over old carpet

$500–$2,600

168 sq. ft. × $2–$14 for LVP + carpet removal at about $1–$1.50 per sq. ft.

14×16 ft. living room

About $2,800 average

Angi’s average for 224 sq. ft.

Open-plan 500 sq. ft. area

$1,530–$4,860

Angi’s published range for a 500 sq. ft. project (average $3,161).

Scope choices that change the price

Close view of hardwood, luxury vinyl, laminate and tile samples showing their edges and textures
  • LVP or laminate. Luxury vinyl plank handles water better, which makes it common in kitchens, baths and basements. Laminate can feel harder underfoot and resists scratches, but most types do not like standing water.
  • Hardwood or engineered wood. Solid hardwood can be sanded and refinished many times. Engineered wood has a real wood top layer over plywood, is more stable with humidity and can go over concrete.
  • Tile. Tile is durable and waterproof but costs more to install and needs a very flat, stiff subfloor.

What affects the price

  • Material. Vinyl and laminate are budget-friendly; hardwood and tile cost more.
  • Room size. Price scales with square footage.
  • Subfloor condition. Leveling or repairing the subfloor adds labor.
  • Old floor removal. Tearing out carpet, tile or glued-down floors adds cost.

Costs that are often left out

  • Subfloor preparation. Uneven or damaged subfloors need leveling or replacement before new flooring goes down.
  • Moisture testing. Concrete slabs and basements should be tested for moisture before wood or some vinyl floors are installed. Ask whether testing is included.
  • Transitions and trim. Thresholds between rooms, baseboard removal and reinstallation, and door trimming may be extra.
  • Moving furniture. Some installers charge to move furniture and appliances.

Upkeep after the job

  • Hardwood. Use felt pads and refinish when the finish wears through.
  • Carpet. Vacuum often and deep-clean periodically.
  • Tile. Reseal cement grout periodically.

Questions to ask before you hire

  • Is the price per square foot installed, or material only?
  • Is removal of the old floor included? What about baseboards and transitions?
  • Will you test the slab or subfloor for moisture?
  • How much extra material are you ordering for waste and cuts?
  • Get at least three quotes. Prices for the same job often vary a lot between contractors.
  • Compare the same scope. Make sure each quote covers the same materials, removal, permits and cleanup.
  • Check license and insurance. Ask for proof of insurance and look up the contractor's license with your state.
  • Get it in writing. A written estimate should list the work, the price, the payment schedule and the warranty.

Keep reading

Sources

Prices are national figures published by the sources above and are for general information only. Example budgets multiply those published ranges by the quantities shown. They are not a quote or an offer from FixFinch or any contractor.