Cost guide · Updated November 2026

How Much Does Foundation Repair Cost?

Foundation repair ranges from sealing a few cracks to stabilizing a settling house, so getting the problem diagnosed comes first.

Typical range

$2,225–$8,133

National average

$5,174

Source: HomeAdvisor, accessed October 2026. Actual prices depend on your home, materials and location.

A woman photographing a crack in a concrete basement wall

Common prices

ItemTypical costWhat it covers
Structural engineer inspection$230–$3,800Fee
Crack repair$250–$800Project total
Slabjacking / mudjacking$500–$1,300Project total
Hydraulic piers$1,000–$3,000 per pierInstalled
Bowing wall repair$4,000–$12,000Project total
Carbon fiber reinforcement$85–$250 per footInstalled
Drainage system installation$2,800–$6,500Add-on

What the labels mean: Fee permit, inspection or service fee · Project total typical total for the whole job · Installed materials and labor · Add-on priced separately from the main job. Permits, removal of old materials and finishing work are included only where a row says so.

Example budgets

These examples show how the published figures add up for common projects. They are arithmetic on the national ranges above, not quotes.

Sealing a few non-structural cracks

$250–$800

Hairline shrinkage cracks that are not growing.

Leveling a sunken patio or garage slab

$500–$1,300

Slabjacking pumps material under the slab to raise it.

Stabilizing a settling corner with 6 piers

$6,000–$18,000

6 × $1,000–$3,000 per pier, plus an engineer’s inspection ($230–$3,800).

Bowing basement wall

$4,000–$12,000

Wall anchors, braces or carbon fiber, depending on how far the wall has moved.

Scope choices that change the price

Close view of a masonry stair-step crack and adjacent wall context
  • Cosmetic or structural symptoms. Thin vertical cracks are often shrinkage. Wider cracks, stair-step cracks in block walls, horizontal cracks, sticking doors and sloping floors can signal movement and are worth an engineer’s opinion.
  • Engineer or repair company. A structural engineer has no stake in selling a repair. Repair companies often offer free inspections but recommend their own systems. Many homeowners get an engineer’s report first and then ask contractors to quote that plan.

What affects the price

  • Type of damage. Hairline cracks are inexpensive; settling and bowing walls are major repairs.
  • Repair method. Piers, wall anchors and carbon-fiber straps each have different costs.
  • Access. Driveways, decks and landscaping can make the work harder.
  • Location. Labor and materials cost more in some regions.

Costs that are often left out

  • Drainage. Water is behind many foundation problems. Gutters, grading and drainage may need fixing too, or the repair can fail.
  • Landscaping and access. Piers and exterior work may disturb landscaping, walkways or driveways. Ask who restores them.
  • Interior finishes. Finished basements may need drywall or flooring removed for access.
  • Permits and engineer sign-off. Some repairs need a permit or an engineer’s letter, which also helps when you sell.

Upkeep after the job

  • Monitor cracks. Mark crack ends with a pencil and date them to see if they grow.
  • Keep water away. Keep gutters clean and soil sloped away from the house.

Questions to ask before you hire

  • What is causing the movement, and how do you know?
  • Has an engineer reviewed this plan?
  • How many piers or anchors, and how deep will they go?
  • Is the warranty transferable to a future buyer?
  • What is not included: drainage, landscaping, interior finishes?
  • Get at least three quotes. Prices for the same job often vary a lot between contractors.
  • Compare the same scope. Make sure each quote covers the same materials, removal, permits and cleanup.
  • Check license and insurance. Ask for proof of insurance and look up the contractor's license with your state.
  • Get it in writing. A written estimate should list the work, the price, the payment schedule and the warranty.

Keep reading

Sources

Prices are national figures published by the sources above and are for general information only. Example budgets multiply those published ranges by the quantities shown. They are not a quote or an offer from FixFinch or any contractor.