Cost guide · Updated November 2026
How Much Do New Gutters Cost?
Gutters are priced by the linear foot, so the length of your roofline and the material drive most of the cost.
Typical range
$629–$1,736National average
$1,182Source: HomeAdvisor, accessed October 2026. Actual prices depend on your home, materials and location.

Common prices
| Item | Typical cost | What it covers |
|---|---|---|
| Vinyl gutters | $3–$7 per linear ft. | Installed |
| Aluminum gutters | $3–$15 per linear ft. | Installed |
| Copper gutters | $15–$40 per linear ft. | Installed |
| Aluminum or vinyl downspouts | $5–$8 per linear ft. | Installed |
| Old gutter removal | $1–$2 per linear ft. | Add-on |
| Gutter guards | $6–$13 per linear ft. | Installed |
| Professional labor | About $75 per hour | Labor only |
What the labels mean: Installed materials and labor · Add-on priced separately from the main job · Labor only installation labor, no materials. Permits, removal of old materials and finishing work are included only where a row says so.
Example budgets
These examples show how the published figures add up for common projects. They are arithmetic on the national ranges above, not quotes.
Single-story home, 120 ft. of aluminum gutter
$680–$2,360120 ft. × $3–$15 + four 10-ft. downspouts × $5–$8 per ft. + removal at $1–$2 per ft.
Two-story home, 200 ft. of aluminum gutter
$1,400–$4,360200 ft. × $3–$15 + six 20-ft. downspouts × $5–$8 per ft. + removal at $1–$2 per ft.
Adding guards to 150 ft. of gutter
$900–$1,950150 ft. × $6–$13 per ft. installed. Angi reports 100 ft. at $600–$1,300 and 200 ft. at $1,200–$2,600.
Scope choices that change the price

- Seamless or sectional. Seamless gutters are formed on site to the length of each run, so they have fewer joints that can leak. Sectional gutters come in pieces and are joined together.
- 5-inch or 6-inch. Larger gutters and downspouts carry more water. Steep or large roof areas and heavy-rain regions often need 6-inch gutters.
- Guard types. Micro-mesh blocks the most debris. Reverse-curve covers shed leaves but are harder to install, and small debris can still get through. Foam and brush inserts are cheaper but need removal and cleaning.
What affects the price
- Material. Vinyl and aluminum are the most affordable; copper is a premium choice.
- Seamless or sectional. Seamless gutters cost more but have fewer joints that can leak.
- Number of stories. Taller homes need more equipment and safety precautions.
- Gutter guards. Guards add cost but cut down on cleaning.
Costs that are often left out
- Fascia repair. Gutters attach to the fascia board. Rotted fascia must be replaced first; ask for the per-foot price.
- Drainage at the ground. Downspouts that dump water at the foundation can cause basement leaks. Extensions, splash blocks or underground drains may be extra.
- Guards do not mean zero maintenance. Angi notes that guards reduce cleaning but do not eliminate it.
Upkeep after the job
- Clean twice a year. Clean gutters in spring and fall, and more often under trees.
- Check slope and hangers. Sagging sections and standing water mean hangers or slope need adjustment.
Questions to ask before you hire
- Are these seamless gutters? What size and gauge?
- How many downspouts, and where will they discharge?
- Is removal of the old gutters included? What do you charge per foot for fascia repair?
- What warranty covers the gutters, the guards and the labor?
- Get at least three quotes. Prices for the same job often vary a lot between contractors.
- Compare the same scope. Make sure each quote covers the same materials, removal, permits and cleanup.
- Check license and insurance. Ask for proof of insurance and look up the contractor's license with your state.
- Get it in writing. A written estimate should list the work, the price, the payment schedule and the warranty.
Sources
- HomeAdvisor cost guide, accessed October 2026
- Angi: gutter installation cost, accessed November 2026
- Angi: gutter guard cost, accessed November 2026
Prices are national figures published by the sources above and are for general information only. Example budgets multiply those published ranges by the quantities shown. They are not a quote or an offer from FixFinch or any contractor.
