Cost guide · Updated November 2026
How Much Does a New Roof Cost?
Roof replacement is priced by roof area and material. Most homes fall into the typical range, but large or steep roofs can cost far more.
Typical range
$5,902–$13,377National average
$9,609Source: HomeAdvisor, accessed October 2026. Actual prices depend on your home, materials and location.

Talk to a local roofing pro
Free call to check availability with a participating roofing pro in your area. Calls go to an independent service provider; FixFinch does not perform the work.
Common prices
| Item | Typical cost | What it covers |
|---|---|---|
| Asphalt shingles | $3–$7 per sq. ft. | Installed |
| Architectural shingles | $4–$6 per sq. ft. | Installed |
| Metal | $7–$13 per sq. ft. | Installed |
| Clay tile | $10–$20 per sq. ft. | Installed |
| Slate | $15–$30 per sq. ft. | Installed |
| Labor | $200–$300 per square (100 sq. ft.) | Labor only |
| Removing the old roof | $1,000–$3,000 | Add-on |
| Hauling and disposal | $500–$1,500 | Add-on |
| Steep-pitch premium | $1,000–$3,000 | Add-on |
| Permits | $100–$1,400 | Fee |
What the labels mean: Installed materials and labor · Labor only installation labor, no materials · Add-on priced separately from the main job · Fee permit, inspection or service fee. Permits, removal of old materials and finishing work are included only where a row says so.
Example budgets
These examples show how the published figures add up for common projects. They are arithmetic on the national ranges above, not quotes.
1,500 sq. ft. of roof, asphalt shingles
$4,500–$10,50015 squares × $300–$700 per square installed. Tear-off and disposal may be extra.
2,000 sq. ft. of roof, asphalt shingles
$6,000–$14,00020 squares × $300–$700 per square installed.
3,000 sq. ft. of roof, asphalt shingles
$9,000–$21,00030 squares × $300–$700 per square installed. Large, complex roofs often have more valleys and flashing.
2,000 sq. ft. of roof, metal
$14,000–$26,00020 squares × $700–$1,300 per square installed.
Roofers measure the roof itself, not your floor plan. Pitch and overhangs make the roof larger than the house footprint, and a two-story house has a smaller roof than a one-story house with the same floor area.
Scope choices that change the price

- Repair or replace. Repairs make sense for isolated damage on a roof that is otherwise in good shape. Widespread curling, granule loss, repeated leaks or a roof near the end of its life usually point to replacement.
- Tear-off or overlay. Some codes allow one new layer over an old one, which skips tear-off. A full tear-off lets the crew inspect and repair the decking and costs more.
- 3-tab or architectural shingles. Architectural (dimensional) shingles are thicker and usually carry longer warranties than basic 3-tab shingles.
What affects the price
- Roof size. Bigger roofs need more material and more labor.
- Material. Asphalt shingles cost the least; metal, tile and slate last longer but cost more.
- Tear-off. Removing old layers adds disposal and labor costs.
- Pitch and access. Steep roofs and multi-story homes take more safety equipment and time.
Costs that are often left out
- Decking replacement. Rotted or soft roof decking is found only after tear-off. Ask for the price per sheet of decking in writing before work starts.
- Flashing and vents. Chimney, wall and valley flashing and roof vents may be reused or replaced. Ask which, because reused flashing can fail before the new shingles do.
- Ventilation and underlayment. Ask whether new underlayment, ice-and-water barrier and ridge or soffit vents are included. Poor ventilation can shorten shingle life.
- Gutters and skylights. Gutters may need to come off during the job. Skylights are often replaced at the same time.
How long it takes
Most single-family re-roofs take one to a few days once work starts, depending on size, weather and how much decking needs repair.
Upkeep after the job
- Inspect after storms. Look for missing shingles and damaged flashing after major storms.
- Keep gutters clear. Clogged gutters let water back up under the roof edge.
- Two warranties. The shingle manufacturer covers materials; the roofer covers workmanship. Get both in writing.
Questions to ask before you hire
- How many squares is my roof, and how did you measure it?
- Is this a full tear-off? How many layers are you removing?
- What is your price per sheet for decking replacement?
- Are flashing, drip edge, underlayment, ice-and-water barrier and vents new or reused?
- What is the manufacturer warranty, and what is your workmanship warranty?
- Get at least three quotes. Prices for the same job often vary a lot between contractors.
- Compare the same scope. Make sure each quote covers the same materials, removal, permits and cleanup.
- Check license and insurance. Ask for proof of insurance and look up the contractor's license with your state.
- Get it in writing. A written estimate should list the work, the price, the payment schedule and the warranty.
Talk to a local roofing pro
Free call to check availability with a participating roofing pro in your area. Calls go to an independent service provider; FixFinch does not perform the work.
Sources
- HomeAdvisor cost guide, accessed October 2026
Prices are national figures published by the sources above and are for general information only. Example budgets multiply those published ranges by the quantities shown. They are not a quote or an offer from FixFinch or any contractor.
