Cost guide · Updated November 2026

How Much Does a New Fence Cost?

Fences are priced by length and material. Most homeowners pay around $23 per linear foot installed.

Typical range

$1,860–$4,843

National average

$3,277

Source: HomeAdvisor, accessed October 2026. Actual prices depend on your home, materials and location.

A new cedar privacy fence with a gate along a backyard

Common prices

ItemTypical costWhat it covers
Chain-link$9–$30 per linear ft.Installed
Wood$20–$50 per linear ft.Installed
Vinyl$30–$60 per linear ft.Installed
Aluminum$25–$75 per linear ft.Installed
4-ft. fence (any material)$10–$36 per linear ft.Installed
6-ft. fence (any material)$25–$60 per linear ft.Installed
Gate$150–$600+, plus $100–$250 laborAdd-on
Old fence removal$10–$20 per linear ft.Add-on
Fence permit$40–$150, if requiredFee
Property survey$200–$1,200Fee
Regrading a slope$1,000–$3,300Add-on

What the labels mean: Installed materials and labor · Add-on priced separately from the main job · Fee permit, inspection or service fee. Permits, removal of old materials and finishing work are included only where a row says so.

Example budgets

These examples show how the published figures add up for common projects. They are arithmetic on the national ranges above, not quotes.

150 ft. of 6-ft. wood privacy fence + 1 gate

$3,250–$8,350

150 ft. × $20–$50 + gate $150–$600 + gate labor $100–$250.

100 ft. of 4-ft. aluminum fence + 1 gate

$2,750–$8,350

100 ft. × $25–$75 + gate $150–$600 + gate labor $100–$250.

200 ft. of 4-ft. chain-link

$1,800–$6,000

200 ft. × $9–$30. Add a gate as above.

Tearing out 150 ft. of old fence first

$1,500–$3,000

150 ft. × $10–$20 per ft.

Height and material both change the per-foot price, so use the material row for your fence and expect taller fences to land higher in that range. Our fence budget estimator does this math for you.

Scope choices that change the price

Wood, white vinyl and black metal fence panels side by side
Left to right: wood, vinyl and metal fencing.
  • Wood or vinyl. Wood costs less up front but needs staining or sealing and eventually board replacement. Vinyl costs more but needs only washing.
  • Privacy or decorative. Solid 6-ft. privacy fences use more material than 4-ft. picket or aluminum fences and catch more wind, so posts must be set deeper.
  • Chain-link or aluminum. Chain-link is the most affordable way to contain pets or kids. Aluminum looks more finished and does not rust, and costs more.

What affects the price

  • Length and height. Longer and taller fences need more posts, panels and labor.
  • Material. Chain link and wood are usually the least expensive; metal costs the most.
  • Terrain. Slopes and rocky ground make post setting harder.
  • Permits and surveys. Many towns require a permit, and a survey confirms your property line.

Costs that are often left out

  • Property line. Building on a neighbor’s land is expensive to fix. A survey ($200–$1,200) confirms the line.
  • HOA and local rules. Many HOAs and towns limit height, style and placement, especially in front yards and near corners. Get approval in writing before ordering materials.
  • Slopes and rock. Sloped yards need stepped or racked panels, and rocky ground makes post holes harder to dig.
  • Utility lines. Call 811 before digging. Most installers do this, but confirm it.

How long it takes

A typical 150–200 ft. fence takes roughly 20–35 labor hours, according to HomeAdvisor, plus time for permits and material delivery.

Upkeep after the job

  • Wood. Stain or seal every few years and replace boards as they weather.
  • Vinyl and aluminum. Wash periodically. Check gate hinges and latches yearly.
  • Chain-link. Tighten fabric and check for rust on older galvanized fences.

Questions to ask before you hire

  • How deep will posts be set, and in concrete or gravel?
  • Who confirms the property line, pulls the permit and calls 811?
  • Are old fence removal and haul-away included?
  • How will you handle the slope in my yard?
  • What is the warranty on materials and on workmanship?
  • Get at least three quotes. Prices for the same job often vary a lot between contractors.
  • Compare the same scope. Make sure each quote covers the same materials, removal, permits and cleanup.
  • Check license and insurance. Ask for proof of insurance and look up the contractor's license with your state.
  • Get it in writing. A written estimate should list the work, the price, the payment schedule and the warranty.

Keep reading

Sources

Prices are national figures published by the sources above and are for general information only. Example budgets multiply those published ranges by the quantities shown. They are not a quote or an offer from FixFinch or any contractor.