Cost guide · Updated November 2026

How Much Does a New Exterior Door Cost?

Exterior door prices depend on the door material, whether you need a single or double door, and whether the frame has to be replaced.

Typical range

$547–$2,375

National average

$1,457

Source: HomeAdvisor, accessed October 2026. Actual prices depend on your home, materials and location.

A dark wood front door standing open on a stucco house

Common prices

ItemTypical costWhat it covers
Steel door$150–$1,400Product only
Fiberglass door$150–$3,000Product only
Wood door$500–$3,000Product only
Double doors$1,250–$6,030Project total
New exterior door frame$130–$380Add-on
Storm door$175–$1,100Installed
Sidelights or transom$1,600–$4,600Add-on
Installer labor$30–$90 per hourLabor only
Old door removal$40–$200, plus about $60 disposalAdd-on

What the labels mean: Product only materials or the product itself, no installation · Project total typical total for the whole job · Add-on priced separately from the main job · Installed materials and labor · Labor only installation labor, no materials. Permits, removal of old materials and finishing work are included only where a row says so.

Example budgets

These examples show how the published figures add up for common projects. They are arithmetic on the national ranges above, not quotes.

Steel prehung door, same size opening

$340–$2,110

Door $150–$1,400 + 3–5 hours of labor at $30–$90 + removal and disposal ($100–$260).

Fiberglass entry door with new frame

$470–$4,090

Door $150–$3,000 + frame $130–$380 + 3–5 hours of labor at $30–$90 + removal and disposal ($100–$260). Decorative glass pushes it higher.

Adding a storm door

$175–$1,100

Installed price for the storm door alone.

Scope choices that change the price

Close-up of an entry door jamb showing the weatherstripping, threshold and handle
  • Prehung or slab. A prehung door comes already hung in its frame and is the usual choice for exterior doors. A slab is the door alone, and only works if the existing frame is square and sound.
  • Steel, fiberglass or wood. Steel is affordable and secure but can dent. Fiberglass resists dents and moisture and can look like wood. Wood looks traditional but needs refinishing.

What affects the price

  • Material. Steel is the most budget-friendly; fiberglass and wood cost more.
  • Single or double. Double doors and multi-panel patio doors cost several times more.
  • Frame replacement. A new frame is needed if the new door is a different size.
  • Glass and hardware. Decorative glass, sidelights and smart locks add cost.

Costs that are often left out

  • Rotted threshold or subfloor. Water often gets under old thresholds. Repairs may be needed before the new door goes in.
  • Size changes. A different-sized door means reframing the opening and patching siding or trim.
  • Hardware. Locks and handles may be extra. Smart locks and deadbolts can cost up to about $300.

Upkeep after the job

  • Weatherstripping. Replace worn weatherstripping and door sweeps to stop drafts.
  • Refinish wood doors. Wood doors need refinishing every few years, especially on sunny exposures.

Questions to ask before you hire

  • Is this a prehung door? Is the frame being replaced?
  • Are removal, disposal, trim and hardware included?
  • Who handles repairs if the threshold or subfloor is rotted?
  • Get at least three quotes. Prices for the same job often vary a lot between contractors.
  • Compare the same scope. Make sure each quote covers the same materials, removal, permits and cleanup.
  • Check license and insurance. Ask for proof of insurance and look up the contractor's license with your state.
  • Get it in writing. A written estimate should list the work, the price, the payment schedule and the warranty.

Keep reading

Sources

Prices are national figures published by the sources above and are for general information only. Example budgets multiply those published ranges by the quantities shown. They are not a quote or an offer from FixFinch or any contractor.